Hire Local Asbestos Contractors For Asbestos Roof Removal
domestic commercial industrial

3 Easy Steps to Clean Your Asbestos Roof

A roof is one of the most important parts of a building, which can define the whole aesthetic value of the structure whether it’s a residential or commercial building. However, we are also familiar with how a property can be contaminated with fibrous material, which is known as asbestos.

But living with asbestos containing materials (ACMs) doesn’t have to be a horror for your wellbeing. There are many ways in handling them correctly without putting you or the other family members to the risk of fibre exposure.

In many buildings across Australia, ACMs have been used in the construction industry because of their amazing physical properties and also their affordability. You can find them on the ceiling, wall, or fence. Some people may consider their danger to the health. However, there are many individuals who still lack awareness of ACM’s hazards.

The statement is based on a survey conducted by the “Asbestos Safety and Eradication Agency” (ASEA) in 2015-2016. This body has discovered that the trend of “asbestos-related disease” (ARD) has transitioned from former miners and ex- workers of ACM manufacturers to homeowners and DIY renovators.

Due to this condition, it would be better if you start to care more about the safety of yourself, as well as your building occupants, by choosing the most secure way to manage ACMs in your property.

asbestos roof removal Brisbane

Asbestos roof removal Brisbane jobs

A contaminated roof is one of the most difficult ACMs to be handled since it is at greater risk of degradation over time. As time goes by, the contaminated material will slowly release cancerous fibres into the air. Airborne fibres can further contaminate other areas. Thus, professional help is necessary to carry out an ACM removal process properly – in accordance with safe work protocols and regulations.

As a homeowner, you can still have a full control of the decision you’ll take to clean up this contaminated product. You can determine which solution suits your condition and budget.

What are the options?

Basically, you can pick one out of three alternatives for your ACM roofs. The choices are described below:

1. Encapsulation

This is considered as the cheapest answer to keep you protected from fibre exposure. The method used is quite simple. The ACM will be sprayed with a special sealant, which can stand the weathering process. The sealant will provide extra protection to the roof and also keep the fibres bonded to the material.

The process is fast and easier, which means that the on-site time can be reduced and there’s no need to use scaffolding. Nevertheless, the sealant can only stand for a few years. You might have to apply a new layer of sealant if the contaminated material started to show degradation sign.

Summary: Roof encapsulation is the fastest solution to get rid of contaminated roofs. However, it requires a constant control from time to time. So, you’ll still have to be aware of any unpredicted contamination that may occur.

2. Over-cladding

This process often includes the instalment of a new roofing sheet over the old one, which apparently a non-ACM product. Firstly, the contractor will check the building structure if it can take more weight from the new material, which is commonly made of metal.

A roof cladding installation must be conducted in the correct way so that it won’t disturb the ACM beneath it. Or else, the cancerous fibres may go airborne and spread to other area. Moreover, if the new sheeting is made of metal, it can decrease value because metal materials are likely to develop rust and corrosion.

Summary: Doing an over cladding on your ACM ceiling will provide stronger protection against deterioration to the contaminated product. However, it can cause fibre exposure since the new sheeting must be strengthened to the structure by bolting the new roofing through the ACM. This procedure may disturb the ACM and lead to a releasing toxic fibre into the air.

3. Total asbestos roof removal Brisbane process

The last option you can take is to remove the whole contaminated roof and replace it with new fibre-free roofing. The process needs to be conducted with extreme care and in accordance with applicable safety guidelines. Therefore, it’s better to leave the job to a licensed removalist.

A licensed contractor has gone through extensive training, has a full certification, and owns a full set of safety equipment and supporting kits to ensure a secure working environment. You’ll be protected all the time during the remediation project.

During the asbestos roof removal Brisbane process, all workers will wear personal protective equipment (PPE) and seal the location by using HEPA vacuum and mist sprayer. For your information, water will temporarily hold the deadly fibres to keep intact with the material. Thus, the contamination level in the air will be at the lowest level.

After the workers remove the ACM from the structure, the contaminated material will be put in grade 3 plastic bags and sealed. The waste is ready to be transported to a disposal facility. They will decontaminate the ceiling for any remaining dust. Afterwards, a new roofing will be placed. Your project is done after you get a clearance certificate to ensure that your roof is free of ACM.

the step of asbestos roof removal Brisbane

Summary: An asbestos roof removal Brisbane is the best choice you can take. By considering this alternative, you’re not only eliminating the contamination source, but you’ll also get a peace of mind since you don’t have to worry about contaminated roof anymore.

If you decide to choose to take one of the first two options, you might be required to make a control plan to keep everyone secure by providing a safety procedure and information of ACM presence within your premise.

Licensing requirement for ACM roofing removal

The work cannot be handled by random contractors. The regulations stated that only those who obtain a license can work with hazardous materials. The licensing can be defined as follow:

  • An on-site ACM inspection must be performed by a licensed assessor. He will also be responsible for creating an asbestos register for a contaminated building.
  • Any non-friable ACM, that is more than 10 square meters in size, must be handled by an A-class or B-class license holder.
  • Friable material can only be managed by an A-class removalist.

All types of jobs must be performed in the safest way possible – in agreement with the safe work guidelines and regulations. Thus, only a certified removalist can perform the job safely and correctly.

Other services: You can find other services to help you with your ACM problems. The services are as follow: Asbestos removal Brisbane, testing, management plan, roof removal, emergency repair, soil remediation, demolition, air monitoring, consultant.

By knowing your problem, you can choose the right service that suits your needs. But if you have no idea which service fits you the best, consult it with an accredited consultant for further advice and recommendation.

About Clear Asbestos Removal Brisbane

We endorse B-class licensed contractors who offer in-depth ACM-related services like asbestos sampling and testing also management set up. Our endorsed members aim to deliver quality services at competitive prices.

You just need to contact one or more of our endorsed contractors with a description of your needs. Our approved contractors will analyse the condition of your premise and perform the job; prompt and quickly. So, if you’re looking for a professional to do your asbestos roof removal Brisbane project, find it at Clear Asbestos Removal Brisbane.

Let us help you find great local asbestos removalists
clear asbestos removal Brisbane features See How it Works
giveit
black-arrow
Want A Fast Quote?

shadow